Shinybow USA SB-6335T Instruction Manual Page 1

INSTRUCTION MANUAL MODEL : SB-5645LCM-CT4x4 HDMI OVER CAT6 MATRIX SWITCHER 4x4 HDMI OVER CAT6 MATRIX SWITCHER HDMI Over CAT6 Matrix Switcher SeriesTha

8REAR PANELREAR PANEL6. RS-232- 1,2,3 & 4 CONNECTION TO CONTROL ROOM4x RS-232 control port to allow for interfacing to a PC. Such as a computer or

REMOTE CONTROLBefore making any connections to the SB-5645LCM-CT. Observe the following:> Ensure the main voltage supply matches the label on the

REMOTE CONTROLIR REMOTE CUSTOM AND DATA CODES (NEC STANDARD)HOW TO SETUP IR CODESCUSTOM CODE : 1CE3DATA CODE :POWER ON : 1CE3 A15EPOWER OFF : 1CE3

REMOTE CONTROLROOM REMOTE CONTROL #1 ~ #4 CUSTOM CODE AND DATA CODESIR CUSTOM AND DATA CODES (NEC Standard)PRESS Number To Select SOURCECUSTOM CODE :

RS-232 SERIAL INTERFACERS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0RS-232 SERIAL INTERFACEPin RS-232 Defi nition1 --

EDID FUNCTIONEDID FUNCTION SETUPEDID Setup To change the EDID setupStep 1 . Press the EDID button The display will show the currently selected EDID mo

EDID FUNCTIONNOTE : The already learned EDID cannot be modifi ed. You can only rebuild a new Learning EDID.For example; When the Source has “Learned” t

EDID FUNCTIONEDID FUNCTION FOR HDMI MATRIX SWITCHERLearning EDID Single to Single Example : Learn Destination #4 EDID To Source #2.Step 1 . Press EDID

TYPICAL APPLICATIONINSTALLING DIAGRAM Sample connection using IR Transmitters (SB-101) and IR Receiver (SB-100) with SB-6335T

TYPICAL APPLICATIONINSTALLING DIAGRAMSample connection using SB-6335T HDBaseT IR Transmitters (SB-101) and SB-6335R HDBaseT IR Receiver to control a S

SAFETY INFORMATION1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipmen

TYPICAL APPLICATIONINSTALLING DIAGRAMSample connection using Audio Extractor To Re-code Audio (SB-5609) or to control ARC (SB-5610) and Extend the HDM

19IR EXTENDERSB-100 Maximum Distance ~ 984 feet (300 meters)SB-100 and SB-100C Receiver Pin configurationVCC (Ring)Signal (center)GND (Sleeve)TipRing

IR EXTENDER20RoHS/95/ECDC 12VIR outFrom ReceiverIR inToReceiverCAT6/6a/7OUTPUTRoHS/95/ECDC 12VIR outFrom ReceiverIR inToReceiverCAT6/6a/7OUTPUTIR EMIT

21LIMITED WARRANTYPLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR

122 Rose Ln. Suite 303 | Frisco, Texas 750341-877-SHINY-USA 1-877-744-6987 1-972-377-2508 [email protected]

TABLE OF CONTENTS1SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting

FEATURESBased on HDBaseT; bi-directional IR, RS-232, Multi format Audio, Ethernet and full resolution HD Video all, signals over CAT5e/6/7 cable. FEAT

SPECIFICATIONSSPECIFICATIONS• Type of Switcher: 4x HDMI inputs To 4x HDMI and 8x CAT5e/6/7 Outputs Matrix Switcher• HDMI Support: HD 1080p-@60Hz, H36

4FRONT PANELFRONT PANEL1. POWER SWITCHThe power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON and

5FRONT PANELFRONT PANEL8. FUNCTION KEY - ALLDisables (mute) video on all destinations OR Selects the same source to all destinations.Option 1- Press A

6FRONT PANELFRONT PANEL12. FUNCTION KEY - RECALLThe system will show previously stored presets, up to a total of 8.Presets are stored in local memory

7REAR PANELREAR PANEL1. DC POWER INLETThe Switcher is fi tted with a DC power plug input connector. Ensure that the outlet type is approved and suffi ci