Shinybow USA SB-5548 Instruction Manual download pdf (Page 11)

RS-232 SERIAL INTERFACE

RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V1.0 & V1.5

For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual.

RS-232 Conﬁ guration

RS-232 cable is a straight thru cable and not null-modem

Deﬁ nition Pin Pin Deﬁ nition

1 1 DCD

TX 2 2 RX

RX 3 3 TX

4 4 DTR

GND 5 5 GND

6 6 DSR

77RTS

8 8 CTS

99RI

RS-232

RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( ETHERNET / RS-232 CONTROL DRIVER V2.0 )

The Shinybow switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, The serial communication

parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When the unit recognizes a complete

command it will perform the requested action - there is no delimiter character required.

Shinybow

Device

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Shinybow USA SB-5548 Instruction Manual Page 11