Shinybow USA SB-5548 Instruction Manual download pdf (Page 3)

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 1.1 OCT 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION ..............................................................1

FEATURES & SPECIFICATIONS .....................................2

FRONT PANEL .................................................................3

BACK PANEL ....................................................................6

REMOTE CONTROL .......................................................7

REMOTE PROTOCOL COMMANDS ................................8

RS-232 SERIAL INTERFACE ...........................................9

IR EXTENDER ...............................................................10

TYPICAL APPLICATION ................................................12

INTRODUCTION

Congratulations on your purchase of one of the most innovative

8x8 AV (Composite Video-BNC/Audio) matrix switching product

with adjust audio volume & balance on the market Today. The SB-

5548BNC is a true Matrix Routing Switcher for AV (Composite &

Stereo Audio) signals. Full support any NTSC or PAL Composite

Video & Stereo Audio TV system. It is a (8) individual Composite

Video (BNC connector) and Stereo Audio inputs with (8) individual

Composite Video (BNC connector) and Stereo Audio outputs

(Audio output with control volume and AR/AL balance). Because

it is a matrix router, any input may be routed to any output; or the

same input may be routed to all outputs or any combination. It

completely eliminates the need to constantly move around video

audio input and output cables. The switcher is useful for Matrix

signals from Composite Video and stereo audio source devices

(such as: VCRs, Camcorders, Video Game Consoles, Video

CDs, DVDs, Satellite Receivers, CAT5 Set Top Boxes, etc.) To

Composite Video/Audio destination devices (such as: LCD TV,

HDTV, Plasma displays, Projectors, etc.). Selection of inputs is

made via the Front Panel push buttons or an Infrared Remote

Control unit or RS-232 control by computer.. An RS-232 Windows

GUI interface is provided for matrix routing control (Windows only).

PACKAGE CONTENTS

Check that you have the following components;

• SB-5548BNC 8x8 Matrix Switcher

• RS-232 V2.0 Protocol Instructions

• Master wireless IR Remote Control (SW-5548BNC)

• 19 inch Ear mount bracket (Part # 1U-440L)

• SB-100 IR Extender distance ~984 feet (300M) Receiver set.

• SB-100C IR Extender distance 6ft(2M) Receiver Cable.

• CD Contents : This manual, Windows GUI, ISP V1.0 Windows driver

• RS-232 Cable 6 feet (2M)

• ISO Screws

• Users Guide

• Power Supply Input : DC12V, 3A, (Worldwide Universal

100~230 VAC, AC 50/60Hz.)

1 2 3 4 5 6 7 8 ... 15 16

Comments to this Manuals

No comments

Shinybow USA SB-5548 Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Video switches Shinybow USA SB-5548