SB-88118x8 DVI HDTV Video Matrix Routing SwitcherINSTRUCTION MANUAL
IR REMOTE CUSTOM AND DATA CODES (NEC STANDARD)HOW TO SETUP IR CODES : CUSTOM CODE : 33CCPOWER ON : 33CC A15EPOWER OFF : 33CC A25DALL : 33CC B04FOFF :
IR REMOTE CUSTOM AND DATA CODES (NEC STANDARD)EDID Setup To change the EDID setupStep 1. Press the EDID button The display will show the currently sel
EDID function : 4x Embedded EDID ModesMode 1. FSS (Fast Speed Start) Automatic capture most suitable EDID from Destination to Source.Mode 2. 1280x1024
EDID FUNCTION FOR DVI MATRIX SWITCHEREDID status To view the current EDID status.Step 1. Press EDID button The button will ash blue and the display w
INSTALLING DIAGRAMSample connection using IR Transmitters (SB-101) and IR Receiver (SB-100) with SB-6335T & SB-6335R to control a projector.NOTE:1
INSTALLING DIAGRAMExample connection using IR transmitters (SB-101) and IR receivers (SB-100) with SB-6335T and SB-6335R to control a satellite receiv
Note: The External IR jack has voltage on the “Ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug). Using a 2-cond
15IR EXTENDERPIN CONFIGURATION:SB-101 and SB-101C Transmitter Pin configuration1. SB-101 IR 300M Transmitter Device
RS-232 SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION -2.0 COMPATIBLERS-232 PROTOCOL COMMANDS (RS-232 CONTROL DRIVER V2.0.1)The ShinybowUSA
17LIMITED WARRANTYPLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR
SAFETY INFORMATION1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipmen
122 Rose Ln. Suite 303 | Frisco, Texas 750341-877-SHINY-USA1-877-744-69871-972-377-2508sales@shinybowusa.comwww.shinybowusa.com
CONTENTS INTRODUCTION ...1FEATURES & SPECIFICATIONS...
FEATURES• 8x DVI digital source devices matrix switched to 8x DVI devices• DVI digital video w/embedded audio, DVI format and CEC/HDCP 2.0 compliant
3FRONT PANELFRONT PANEL1. POWER SWITCH: The power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON an
4FRONT PANELFRONT PANEL8. FUNCTION KEY - ALLDisables (mute) video on all destinations OR Selects the same source to all destinations.Option 1- Press A
5FRONT PANELFRONT PANEL12. FUNCTION KEY - MEMORYThe system will show store presets, up to a total of 16.Presets are stored in local memory using Sourc
6BACK PANELBACK PANEL1. DC POWER INLET: The Switcher is tted with a DC power plug input connector. Ensure that the used is of an approved typ
7REMOTE CONTROLBefore making any connections to the SB-8811. Observe the following:• Ensure the mains voltage supply matches the label on the supplie
Comments to this Manuals